Berthold Technologies stands for superior, long-term measurement solutions. The number of customers in the global Oil & Gas Industry is testimony for our excellent performance. Our nucleonic instruments based on Gamma Transmission Principle are perfectly suited for the offshore oil industry. Installations are found in hundreds of refineries worldwide. Regardless of whether a high or low level alarm, a continuous level, interface or a density measurement is needed, all our detectors are characterized by outstanding sensitivity and long-term stability, keeping radiation levels and maintenance to a minimum. Installed on separator vessels, scrubbers, delayed coking units, reformers, crackers or alkylation units, our nucleonic instruments provide an accurate and representative reading, which remains reliable throughout operation. Berthold supports with technological expertise and knowledge in the development of innovative processes, especially if tailor-made solutions are required.
Interface Measurement and Multiphase Level Measurement
The interface position between two liquid phases or the height of different product layers can be easily determined with the radiometric measurement solutions from Berthold. Our products can even monitor emulsion layers. By measuring the density profile of the liquids, separation processes are monitored reliably. In the Oil & Gas Industry, the Multiphase Level Measurement from Berthold is used to measure the different layers of sand, water, emulsion, oil and foam in separators or slug catchers.
Advantages of the Multiphase Level Measurement
Multiphase Level Measurement MPLM
With the Multiphase Level Measurement system from Berthold, the operator receives a live picture of the highly complex separation process taking place inside the tank. It measures the different layers of sand, water, emulsion, oil and foam in separators or slug catchers. Due to the use of Cs-137 isotope and high sensitive scintillation detectors outside of the vessel, this solution provides the highest level of reliability and accuracy
Desalter/Separator operators are faced with rigid environmental regulations. To ensure the efficient control of water/oil interface levels in desalters and interface levels, operators are increasingly turning to radiometry for an accurate solution to their problems. The Multiphase Level Measurement from Berthold Technologies is designed to measure the level of the different product layers and to monitor the development of the transition phase, by measuring the density distribution over height. The operator gains a real-time picture of the separation process inside the tank, which allows him to adjust the process parameters ideally and in time. Due to the non-contacting, non-intrusive nature of the measurement, it is ideal for high temperature, high-pressure processes or when other demanding factors such as aggressive or sticky media and foam prevail. Typical applications are in desalters, polymerization plants, in the oil/water/gas separation or acid settling in alkylation units.
Berthold Technologies GmbH & Co. KG
Calmbacher Str. 22
75323 Bad Wildbad
Phone: +49 7081 177-0
Fax: +49 7081 177-167
Regelung Automation (SEA) Sdn. Bhd
No. 2 Jalan Anggerik Mokara 31/58, Kota Kemuning, Section 31
40460 Shah Alam, Salangor Darul Ehsan
Phone: +60 351212300
Fax: +60 351223213
Get in contact with German companies in 3 easy steps! With one single question you can reach all relevant German Pavilion exhibitors of your selected industrial branch.
Click here if you notice an image that violates copyright or privacy rights.